Less chaos on the floor. More money in the bank.
Production software for DTG and DTF print floors.
For print shops and 3PLs selling on Shopify. PrintRun puts a QR code on every garment, so every station from pick to pack knows what to do next, and you stop paying for the same shirt twice.
Live numbers from the Threadheads floor, running on PrintRun
Proven on the
floor.
An 8‑figure clothing brand and 3PL that runs all its own orders and its clients' orders on PrintRun.
* Estimate, using the same numbers as our calculator: handling drops from about 3 minutes a piece to 1, and each issue caught and fixed saves 15 minutes plus about A$11 of garment, ink and consumables. Wages at the Australian minimum wage, converted to your currency.
Scan the shirt.
Know what to do next.
No more hunting for slips, files or missing pieces. One scan tells your team what to do with the garment in their hands.
Problem: Slips fall off and nobody knows whose shirt it is.
Pick: the QR code goes on the shirt Solution: Every garment gets a QR label at pick, so the order travels with the shirt. See the labels go on
Problem: Every station starts with a hunt for the slip or the file.
Print: scan and the design loads Solution: Scan the shirt and the design loads.
Problem: Shirts get printed twice.
Catch: scan, check, pass or fail Solution: Every shirt is scanned off the dryer. Fails reprint first. See Catch
Problem: One missing piece holds up the whole order.
Bin: scan and it goes in its bin Solution: A numbered bin shows what's still coming. See the bins
Problem: Someone walks the floor to find an order.
Tracker: open an order, see each shirt Solution: Every scan updates the order's status.
On the
floor, 1 person now does what took 2 or 3.
- Fewer mistakes
- Faster orders
- Happier customers
- A floor people like working on
- More money in the bank
Pick to Pack.
Every shirt accounted for.
Pick a station. On the left is our floor. On the right is the screen your team uses.
Paper nearly broke our floor.
So we built
.


Peak season on paper
We run the Threadheads floor. In peak season it ran on paper slips.
- Paper all over the floor
- Orders lost
- Customers chasing us
- New staff hired and trained just to keep up
After one Black Friday it was just too much. We never wanted to do it again.
What we wanted
QR codes instead of paper. But nothing on the market did exactly what we wanted. So we built it.
- Native to Shopify
- Supports DTG, DTF and pick and pack in one order
- Print files matched instantly
- Our clients' orders in the same flow as our own
- Stock tracked and pushed to Shopify so we never oversold or undersold
- Plus full inventory management, live order tracking and so much more
PrintRun now runs the whole Threadheads floor.
We set it up for you.
Setup is included in your plan. No IT project on your side: we get your floor running and stay until it does.
- Step 1
Your gear
We send you a list of the computers, screens, scanners, label printers and bins each station needs. You pay for the gear, we get it delivered and come and set it up with you.
- Step 2
We set it up
We connect your Shopify store, bring in your products and set up your stations, printers and labels.
- Step 3
Your first orders
We walk your team through real orders at every station.
- Step 4
Your first week
We stay with you for about a week, until it runs without us.
One plan.
The whole floor.
Every station, every location and every user. You pay for what goes through the floor.
- Pick, Print, Catch and Pack
- DTG, DTF and finished stock
- Multiple clients and locations
- Setup and your first week with us
12‑month plan.
How we work it out
US$500 a month includes 5,000 pieces. After that, US$0.10 a piece (0 extra pieces: US$0). A piece is one garment or stock item through the floor. Prices in US dollars.
The chaos is our estimate from the Threadheads floor before PrintRun: handling each piece took about 3 minutes and now takes about 1, about 1.7% of pieces needed a reprint, and each reprint cost about A$11 for the garment, ink and consumables plus 15 minutes of someone's time. The starting wage of US$25 an hour is the US average for production workers (BLS, May 2025).
Straight answers.
Something we haven't covered? hey@printrun.io
Do we have to scan every item at every station?
No. You choose how much checking each station does. At Pick, you can make pickers scan or tick off every item, or skip it for speed: Threadheads prints the pick list, picks the shirts, sticks on the QR labels and sends them on to print. At Pack, the packer can scan every item, or the order checks itself off and the packer just looks against the pictures. Catch is the one scan you keep, because it is your quality check. It brings up what the shirt should look like, lets your team log a redo on the spot, and tells them whether the shirt goes to the packing bench or which bin it belongs in.
Can we run DTG and DTF on the same floor?
Yes. Pick and pack, DTG and DTF all run on the same floor, even within one order. Picking and film printing happen at the same time, and the pieces are matched up afterwards so nothing gets lost. DTG loads the design when the shirt is scanned at the printer. DTF uses Film Print to send the run to your RIP, which nests the gang sheets. Each film carries a QR code, so at the heat press a scan shows which film goes on which shirt. If a job lands at the wrong printer, switch it with one press and it keeps its label and its place in the batch.
Is there a charge per user, client or location? What about a peak month?
No charge per user, client or location. One plan covers all of them, and the 5,000 pieces are counted across the whole floor. In a busy month you pay US$0.10 for each piece over 5,000. Nothing else changes.
Which stores and shipping tools work?
Shopify, manual orders and our orders API, so any other system can send orders straight into PrintRun. Shipping labels print through StarShipIt or Portless and the tracking number goes back to Shopify. More sales channels are on the roadmap.
How long does setup take, and what does the gear cost?
Setup takes about a week on your floor. Each station (Pick, Print, Catch and Pack) needs a computer, screen, keyboard, mouse and scanner, Pick and Pack also need a thermal label printer, and multi-item orders need bins. We send you a list of everything, you pay for it, and we get it delivered. Then we come and set it up with you: we connect your Shopify store, bring in your products and orders, and get every station, printer and bin working.
Why not Myze, Brother's own software?
Myze is built around Brother GTX, with other printers through a CadLink RIP, and it also does embroidery and sublimation. PrintRun runs DTG, DTF and pick and pack in one flow, keeps 3PL clients' stock and billing apart, counts your blanks as they're used and buys them just in time, and setup on your floor is included in the plan.
We do embroidery or screen print. Does PrintRun handle it?
Not yet. They may come in later updates, but for now we've focused on making PrintRun the best it can be for DTG, DTF and pick and pack. It doesn't run embroidery, screen print or sublimation.
See what PrintRun
would save your floor.
30 to 60 minutes on a video call. What we'll cover:
- DTG and DTF on one floor
- Inventory and base garments
- Purchase orders and just-in-time blanks
- The login your clients see
- Print file issues
- What happens when a blank runs out
- Shopify product sync
Thanks. We have your details.
Our calendar didn't load, so we'll email you to set a time.
Nearly there
We couldn't send your details from here. Email them to us and we'll set a time.
Email hey@printrun.ioWhat is PrintRun?
PrintRun is production software for DTG and DTF print shops, Shopify brands that print in-house, and 3PL and print-on-demand businesses. It puts a QR code on every garment and runs each order through four stations: Pick, Print, Catch and Pack, with numbered bins for multi-item orders. It also manages your inventory and automates ripping, sending each print file straight to your RIP. It works with Shopify and manual orders, Brother GTX printers, PNG hot-folder RIPs and thermal label printers.